. 1.4301 Stainless Steel Alloy X5CrNi18-10 Stainless Steel fittings parts components
 
 
14301 Stainless Steel Alloy

 

1.4301 Stainless Steel Alloy

 

   Grade :     X5CrNi18-10
    Number:     1.4301
    Standard: EN 10088 - 2 : 2005   Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088 - 3 : 2005   Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    Classification:     Austenitic stainless steels - standard grade
    Equivalent grades:    AISI 304  UNS S30400 X5CrNi18-10 AISI304 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


Chemical composition % of the ladle analysis   of grade   X5CrNi18-10 (1.4301)
 
 
 
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
C Si Mn Ni P S Cr N
max   0.07 max   1 max   2 8 - 10.5 max   0.045 max   0.015 17.5 - 19.5 max   0.11
 
 
 
 
 
 
 
 
 
 


Equivalent grades of grade   X5CrNi18-10 (1.4301)
 
 
USA
-
Germany
DIN,WNr
Japan
JIS
France
AFNOR
England
BS
China
GB
Sweden
SS
Poland
PN
Finland
SFS
Russia
GOST
304
X5CrNi18-9
SUS304
Z7CN18-09
304S31
0Cr18Ni9
2333
0H18N9
725
08KH18N10

PRODUCT